Hosein Alidadi; Hassan Karimian; Edris Bazrafshan; Ali Asghar Najafpoor; Shahrbanoo Rafe
Abstract
Background and Objective: Textile industry is one of the largest consumers of dyes. Approximately 75% of global dye production is used for dyeing textile, leather, and paper products. Dyes due to their complexstructure are mostly stable, toxic, carcinogenic, mutagenic, and resistant to biodegradation; ...
Read More
Background and Objective: Textile industry is one of the largest consumers of dyes. Approximately 75% of global dye production is used for dyeing textile, leather, and paper products. Dyes due to their complexstructure are mostly stable, toxic, carcinogenic, mutagenic, and resistant to biodegradation; they also can cause allergies and skin conditions in humans.This study aimed to evaluate the efficacies of multi‐walled carbon nanotubes and palm ash for dye removal from textile wastewater in Baluch region ofIranshahr in Iran. Methods: This experimental study was performed on textile wastewater with a dye concentration of 20 mg/L in 2013. The efficacy of multi‐walled carbon nanotubes and palm ash for dye removal at different concentrations, durations (30, 60, 90, 120, and 150 minutes), and pH ranges (3, 5.7, 9, and11) was investigated. Dye concentration in different samples was measured, using a spectrophotometer at a wavelength of 525 nm. Results: The rates of dye removal using multi‐walled carbon nanotubes at pHs of 3, 5, 7, 9, and 11, dye concentration of 20 mg/L, and adsorbent concentration of 0.05 g/L were 85.5%, 93.4%, 88.4%, 81.3%, and 75.3%, respectively during 180 minutes. The corresponding values for palm ash were 88%, 92.8%, 96%, 92.2%, and 88.7%, respectively. The rates of dye absorption were 1710, 1868, 1769, 1626, and 1506 mg/g for multi‐walled carbon nanotubes and 1763, 1857, 1921, 1844, and 1775 mg/g for palm ash, respectively. According to Langmuir isotherm model, adsorption isotherms were R2=0.876 and R2=0.980 for carbon nanotubes and palm ash, respectively. The maximum removal of chemical oxygen demand (COD) inmulti‐walled carbon nanotubes was obtained at pH=5, adsorbent concentration of 0.05, and contact time of 180 min (73.4%). For palm ash, maximum removal was achieved at pH=7, adsorbent concentration of 0.05,and contact time of 180 min (70.6%). Conclusion: Dye removal from textile wastewater can be promoted by increasing reaction time. Dye and COD removal by multi‐walled carbon nanotubes and palm ash was desirable. In fact, in multi‐walled carbonnanotubes, efficacy was desirable at acidic pHs, while in palm ash, neutral pH was considered desirable. Therefore, use of palm ash for the removal of environmental pollutants can be cost‐effective, given its high abundance. Paper Type: Research Article
Alireza Ranaee; Mahdi Mokhtari; Hosein Alidadi; Mohammad Hasan Ehrampoush
Abstract
Background and objective: Mushroom cultivation has recently been developing in Iran with a production level of 90 tons per year.Approximately 5 kg of waste is generated by producing one kilogram of button mushrooms.These wastes could be refined by using vermicompost technology converting them into valuable ...
Read More
Background and objective: Mushroom cultivation has recently been developing in Iran with a production level of 90 tons per year.Approximately 5 kg of waste is generated by producing one kilogram of button mushrooms.These wastes could be refined by using vermicompost technology converting them into valuable organic fertilizers to replace chemical fertilizers as a way to achieve sustainability. This study aimed toconvert button mushroom production wastes into manure and investigate the chemical properties and quality of this fertilizer. Methods: Such wastes as rotten mushrooms, spent mushroom compost (SMC) and peat are generated during the cultivation process of button mushrooms in large quantities. In this study, SMC was vermicomposted in an optimized process of treatment with wood chips, rotten mushrooms, carrot scum and leaves. Quantitative and qualitative indicators and their changes were investigated during six weeks. The obtained results were compared with the National Standards of Vermicompost (No. 13724) and the overall quality was determined in the final product. We used the SPSS software and Pearson’s correlation coefficient at the significance level of 0.05 in order to examine the correlation between the inorganic materialsand changes in other parameters. In addition, Linear Regression Analysis was used to determine the relationship between the studied variables. Results: The results of this study indicated that the Total Organic Carbon (TOC), potassium and total nitrogen in all the treatments increased with time. However, pH and electrical conductivity (EC) levels declined during the vermicomposting process. Furthermore, a significant increase was observed in the C/N ratio in all the treatments by the end of the six‐week period. Therefore, all the fertilizers were classified as Grade one. Conclusion: According to the results of this study, vermicompost process could enhance the indicators of organic fertilizers derived from vermicompost beds. Thus, this method could be suitable for the wastemanagement of button mushroom production in order to achieve a sustainable agriculture. Paper Type: Research Article
Mohammad Reza Alipoor; Hossein Alidadi; Ali Asghar Najafpoor; Roya Peiravi; Hadi Rahmatiyar
Abstract
Background and objective: Industrial developments and urban sprawl have led to the production of huge proportions of wastewater. Wastewater is potentially harmful for humans and it has remarkably adverse effects on the natural environment. With regard to the importance of preserving health and protecting ...
Read More
Background and objective: Industrial developments and urban sprawl have led to the production of huge proportions of wastewater. Wastewater is potentially harmful for humans and it has remarkably adverse effects on the natural environment. With regard to the importance of preserving health and protecting the natural resources against pollution, this study aimed to evaluate the performance of wastewater stabilization ponds in the wastewater treatment plant of Olang, Mashhad. Methods: This cross‐sectional study examined the raw wastewater and effluent of Olang treatment plant from 2011 to 2012. Weekly sampling as well as BOD5, COD and TSS tests were conducted according to the standard methods. The collected data were analyzed by SPSS software, one‐way ANOVA and one‐sample t‐test at a significance level of 0.05. Results: In 2011, the average concentration of BOD5, COD and TSS in the effluent was 75±30.67, 145±19.46 and 86±13.28 mg/L, respectively. In addition, their treatment efficacy was 79.79±10.77%,82.53±4.57% and 77.17±3.92%, respectively. The figures were respectively 83±14.08, 146±23.72 and 109±14.73 mg/L and 82.7±5.11%, 82.82±3.82% and 78.46±3.93% in 2012. Conclusion: The effluent could be used for agricultural irrigation since its features are compatible with the standard parameters. Paper Type: Research Article